ACMA Telecommunications Compliance
for Electronic Products in Australia
Understanding ACMA Telecommunications Compliance for Electronic Products
Telecommunications compliance in Australia is governed by the Telecommunications Act 1997 and regulated by the Australian Communications and Media Authority (ACMA). All telecommunications devices must adhere to the ACMA Telecommunications Labelling Notice (TLN) Instrument 2015, ensuring they meet the required standards for safety, performance, and network reliability. Compliance is mandatory for any product connecting to telecommunications networks, including cellular devices and equipment
The Importance of Telecommunications Compliance
Telecommunications compliance is critical to ensure that devices can connect to public networks safely and reliably without causing interference. By adhering to ACMA regulations, manufacturers ensure that their products meet Australian standards and protect network integrity, as well as user safety.
Key Requirements for Telecommunications Devices
ACMA Telecommunications Labelling Notice (TLN)
ACMA Telecommunications Labelling Notice (TLN) The ACMA TLN mandates that all telecommunications devices must comply with specific Australian standards. Products considered “high risk,” such as cellular devices with voice capabilities, require accredited test reports. The following reports are typically necessary:
ILAC-accredited test reports
CB certificates with accompanying reports
For lower-risk devices, non-endorsed test reports may be acceptable, depending on the specific product and risk level.
Relevant Telecommunications Standards
Telecommunications devices must comply with the following key standards:
AS/CA S042.1: General access requirements for telecommunications devices that connect to public networks.
AS/CA S042.4: Standards for mobile devices, including those with Voice over LTE (VoLTE) capabilities.
AS/NZS 62368.1: Safety standard for communications equipment, replacing AS/NZS 60950.1. It includes stringent requirements for electrical safety and product durability.
Additionally, devices exposed to harsh environments, such as outdoor equipment, must meet Ingress Protection (IP) testing requirements as defined by AS 60529, with IP67 being the most common rating for dust and water resistance.
Radio and EMC Compliance
For devices that incorporate wireless communication modules, such as LTE, 4G, or 5G, compliance with the following standards is required:
EN 301 908-1/2/13: Standards for cellular devices.
Radiated Spurious Emissions (RSE): This testing ensures that devices do not emit harmful radio signals that could interfere with other equipment.
EME Compliance Electromagnetic Emission
(EME) compliance is also a key requirement under the Regulatory Compliance Mark (RCM) process. This ensures that devices meet Australian standards for emissions and do not cause interference with other electronic equipment.
EMR Compliance
Electromagnetic Radiation (EMR) compliance is also a key requirement under the RCM process. This ensures that the product is compliant with Human RF safety requirements as prescribed in ACMA’s General Equipment Rules
Common Technologies and Devices Requiring Compliance
A wide range of advanced telecommunications technologies is subject to regulatory oversight by ACMA to ensure proper performance and safety within Australia’s network infrastructure. These technologies include:
- 3G, 4G, 5G: Supporting various types of wireless communications, from basic connectivity to high-speed data transfers.
- LTE (Long-Term Evolution): A standard for wireless broadband communication used by devices requiring fast, reliable internet access.
- VoLTE (Voice over LTE): A protocol for high-quality voice calls over LTE networks.
- VoWiFi (Voice over Wi-Fi): Enabling voice communication through Wi-Fi networks, often used in areas with limited cellular coverage.
- NB-IoT (Narrowband Internet of Things): A low-power wide-area network technology for connecting devices in the IoT ecosystem.
- CAT M1 (Category M1): A cellular technology designed for IoT devices that require efficient power consumption and data usage.
Various products equipped with these technologies, such as the following, must comply with ACMA regulations:
- Communication Routers: Devices facilitating data transmission over cellular and wireless networks.
- Tracking Systems: Including vehicle and asset trackers used in fleet management or logistics.
- Wearable Devices: Such as smartwatches that provide connectivity through cellular modules.
- Data Transfer Units: Gateways used in remote monitoring or telemetry systems to transmit data over cellular networks.
- Monitoring and Control Stations: Deployed in industrial or environmental monitoring systems to provide real-time feedback via wireless connectivity.
Any electronic product integrating a cellular module or modem is subject to strict adherence to ACMA’s telecommunications standards. Both the embedded module and the overall system need to meet these regulatory requirements to ensure they function within Australia’s network environment without causing interference or safety concerns.
Best Practices for Achieving Compliance
Comprehensive Test Reports
To simplify the compliance process, it is advisable to obtain comprehensive test reports, such as EN 301 908-1 for the entire device, including the Radiated Spurious Emissions (RSE) test. This approach reduces the need for additional local testing.
Safety Testing and Reports
Ensure that your device has an ILAC-accredited safety test report compliant with AS/NZS 62368.1, and that the report includes Australian national variations. This ensures that local testing will not be necessary if the report is valid and up to date.
Related Services
Click here to know about the Radio Compliance ACMA
Click here to know about the Telecommunication Compliance ACMA
Click here to know everything about GEMS MEPS Compliance
Click here to know everything about EME/EMR Compliance
Click here to know everything about ERAC/EESS Compliance
Other Services
Click here to know about the Approval Process for the Canadian Market
Click here to know about the CCC certifications
Click here to know everything about European Type Approval
Click here to know everything about Type Approval for Fiji
Click here to know everything about Type Approval for Hong Kong
Click here to know everything about India Approvals
Click here to know everything about Type Approval for Japan
Click here to know everything about Type Approval for Malaysia
Click here to know everything about Type Approval for Saudi Arabia
Click here to know everything about Type Approval for South Africa
Click here to know everything about NCC & BSMI Certificate
Click here to know everything about Type Approval for USA
Company Strengths at a glance
Why C-PRAV?
We specialize in ACMA regulations & compliance. We guide you and ensure that your telecommunications products meet the specific ACMA TLN standards like AS/CA S042.1, S042.4, S042.5, safety compliance with AS/NZS 62368.1 and other RCM requirements. Whether it’s cellular device or router, or IoT systems, we offer tailored solutions to meet your product’s specific needs, ensuring that both the Radio module and the host device comply with ACMA standards.
Choose Compliance, Choose Certifications, Choose C-PRAV
We Have Great Answers
Ask Us Anything
Key standards include AS/CA S042.1 and S042.4 for telecommunications network access and AS/NZS 62368.1 for electrical safety, among others.
Devices such as cellular routers, vehicle trackers, smartwatches, and data gateways that incorporate cellular modules or modems require ACMA compliance to meet regulatory standards in Australia.
The Regulatory Compliance Mark (RCM) is required for all telecommunications devices sold in Australia, indicating that the device complies with ACMA’s safety, EMC, and radiofrequency standards.
In many cases, CE or FCC test reports can be used if they meet Australian standards, but local testing may still be required to address Australian-specific requirements.
High-risk devices, such as cellular devices with voice capabilities, require ILAC-accredited or CB test reports, while low-risk devices may only need non-endorsed test reports, depending on the product type.
Yes, devices exposed to harsh environments (e.g., outdoor routers) must meet Ingress Protection (IP) standards, such as IP67, to ensure they are resistant to dust and water.
Regulatory Updates for AU/NZ
Australia: ACMA establishes framework for upper 6 GHz spectrum band
The Australian Communications and Media Authority (ACMA) has announced the establishment of a regulatory framework for the upper 6 GHz spectrum band (6425–7125 MHz), a significant step towards enhancing wireless communication capabilities in the country. The consultation will begin from first half of 2024. This consultation will investigate its potential
ACMA Updates RALI FX16 for Improved Spectrum Management
Effective May 17, 2024, ACMA’s updated Radiocommunications Assignment and Licensing Instruction (RALI) FX16 introduces enhancements for better spectrum coordination and management. New Criteria and Guidance: Additional criteria and detailed guidance aim to improve frequency coordination with spectrum licensed services, ensuring more efficient spectrum use. Revised Assignment Strategy: For two-frequency fixed
ACMA’s Initiative: Revamping Regulations for Public Telecommunication Services and Cellular Mobile Telecommunication Devices
The consultation period for the revision of the Radiocommunications Licence Conditions (PTS Licence) Determination 2013 and Radiocommunications (Cellular Mobile Telecommunications Devices) Class Licence 2014 instruments concluded on December 1, 2023. After carefully reviewing the received submissions, ACMA has made the decision to remake the instruments and introduce amendments to the